files/EXCELLENCESERIES9033EACTION.jpg
files/EXCELLENCESERIESACTION.jpg
files/RAMMER_EXCELLENCE_1322E.png
files/RAMMER_EXCELLENCE_1655E.png
files/RAMMER_EXCELLENCE_2166E.png
files/RAMMER_EXCELLENCE_2577E.png
files/RAMMER_EXCELLENCE_3288E.png
files/EXCELLENCE_SERIES_4099E.png
files/EXCELLENCE_SERIES_5011E.png
files/EXCELLENCE_SERIES_9033E.png
There is a Rammer® hydraulic hammer for virtually any breaking application. So whether you are working with demolition, recycling, mining, construction or quarrying, we have the hammer to give you the best results.
Rammer® hammers are tough, durable and offer you the most economical owning and operating costs while delivering maximum production.
Stronger than time, the Excellence Line is Rammer flagship line of hydraulic hammers, which has been serving customers around the world for over four decades. The Excellence Line continues Rammer's tradition of delivering innovative hammers designed to improve your profitability, safety and performance.
All Excellence Line hammers include integrated smart RD3 remote monitoring system. With MyFleet portal access to data you are able to follow operating hours, GPS location and service intervals for easier fleet management and more efficient processes.
With Rammer's Medium Range hydraulic hammers no job is too dirty and no conditions are too tough for you.
Slim and lightweight construction allows the hammer to reach narrow spaces and offers the best in market power-weight ratio for higher productivity.
Medium Range hydraulic hammers are your reliable long life solution for any breaking application for carriers between 19,800-264,000.
Features:
The Rammer 1322E has been built to last. The 850 kg hammer is suitable for carriers in the 9 to 15 tonne range. Low-maintenance design ensures lower owning and operating costs.
The 1322E features field replaceable lower tool bushing and sealed membrane-type accumulator to ensure that every blow is as hard as the previous, whilst providing protection against hydraulic spikes.
The Rammer 1322E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 850 kg | 1870 lb |
| Weight | 710 kg | 1570 lb |
| Impact rate (frequency) | 500 - 1000 bpm | |
| Operating pressure | 125 - 160 bar | 1815 - 2320 psi |
| Oil flow range | 60 - 120 l/min | 15.9 - 31.7 gal/min |
| Pressure relief setting *2 | 175 - 210 bar | 2540 - 3045 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Pressure in LP-circuit | 26 - 28 bar | 375 - 405 psi |
| Back pressure max | 20 bar | 290 psi |
| Input power | 32 kW | 43 hp |
| Tool diameter | 95 mm | 3.74 in |
| Pressure line connection (IN) | BSPP-internal 1" | |
| Return line connection (OUT) | BSPP-internal 1" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 1/2" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 9 - 15 t | 19800 - 33100 lb |
| Noise level, measured (2000/14/EC) | 136 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 140 dB(A) | |
The Rammer 1655E hydraulic hammer is suitable for carriers in the 12 to 20 tonne range. The 1,100 kg hammer with an impact rate of 540–920 blows per minute, features Rammer’s Fixed Blow Energy operating principle, which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 1655E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 1100 kg | 2430 lb |
| Weight | 890 kg | 1960 lb |
| Impact rate (frequency) | 540 - 920 bpm | |
| Operating pressure | 135 - 145 bar | 1960 - 2105 psi |
| Oil flow range | 90 - 130 l/min | 23.8 - 34.3 gal/min |
| Pressure relief setting *2 | 190 bar | 2755 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 31 kW | 42 hp |
| Tool diameter | 115 mm | 4.53 in |
| Pressure line connection (IN) | SAE 6000 psi 1" | |
| Return line connection (OUT) | SAE 6000 psi 1" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 12 - 20 t | 26500 - 44100 lb |
| Noise level, measured (2000/14/EC) | 123 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 127 dB(A) | |
The Rammer 2166E hydraulic hammer is suitable for carriers in the 16 to 26 tonne range. The 1,360 kg hammer with an impact rate of 430 - 790 blows per minute features Rammer’s Fixed Blow Energy operating principle, which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 2166E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 1360 kg | 3000 lb |
| Weight | 1130 kg | 2490 lb |
| Impact rate (frequency) | 430 - 790 bpm | |
| Operating pressure | 140 - 160 bar | 2030 - 2320 psi |
| Oil flow range | 120 - 180 l/min | 31.7 - 47.6 gal/min |
| Pressure relief setting *2 | 210 bar | 3045 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 48 kW | 64 hp |
| Tool diameter | 125 mm | 4.92 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 16 - 26 t | 35300 - 57300 lb |
| Noise level, measured (2000/14/EC) | 121 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 125 dB(A) | |
Rammer 2577E hydraulic hammer is suitable for carriers in the 21 to 32 tonne range. The 1,670 kg hammer with an impact rate of 450 to 750 blows per minute features Rammer’s Fixed Blow Energy operating principle which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 2577E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 1670 kg | 3680 lb |
| Weight | 1410 kg | 3110 lb |
| Working length | 2299 mm | 90.5 in |
| Impact rate (frequency) | 450 - 750 bpm | |
| Operating pressure | 135 - 145 bar | 1960 - 2105 psi |
| Oil flow range | 140 - 200 l/min | 37.0 - 52.8 gal/min |
| Pressure relief setting *2 | 190 bar | 2755 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 48 kW | 64 hp |
| Tool diameter | 135 mm | 5.31 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 23 - 30 t | 50700 - 66100 lb |
| Carrier weight, range *3 | 21 - 32 t | 46300 - 70500 lb |
| Noise level, measured (2000/14/EC) | 120 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 124 dB(A) | |
The 2,350 kg Rammer 3288E hydraulic hammer is suitable for carriers in the 26 to 42 tonne range. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 3288E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 2350 kg | 5181 lb |
| Weight | 2040 kg | 4500 lb |
| Working length | 2581 mm | 101.6 in |
| Impact rate, Long stroke | 370 - 630 bpm | |
| Impact rate, Short stroke | 460 - 740 bpm | |
| Operating pressure | 150 - 160 bar | 2175 - 2320 psi |
| Oil flow range | 160 - 250 l/min | 42.3 - 66.0 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 67 kW | 90 hp |
| Tool diameter | 142 mm | 5.59 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 28 - 38 t | 61700 - 83800 lb |
| Carrier weight, range *3 | 26 - 42 t | 57300 - 92600 lb |
| Noise level, measured (2000/14/EC) | 124 dB(A) | |
| Noise level, guaranteed (2000/14/EC) |
128 dB(A) |
|
The 3,380 kg Rammer 4099E is suitable for carriers in the 36 to 55 tonne range. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 4099E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 3380 kg | 7450 lb |
| Weight | 2800 kg | 6170 lb |
| Working length | 2962 mm | 116.6 in |
| Impact rate, Long stroke | 400 - 560 bpm | |
| Impact rate, Short stroke | 520 - 700 bpm | |
| Operating pressure | 150 - 160 bar | 2175 - 2320 psi |
| Oil flow range | 250 - 350 l/min | 66.0 - 92.5 gal/min |
| Pressure relief setting *2 | 210 bar | 3045 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 12 bar | 175 psi |
| Input power | 93 kW | 125 hp |
| Tool diameter | 166 mm | 6.54 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 37 - 50 t | 81600 - 110200 lb |
| Carrier weight, range *3 | 36 - 55 t | 79400 - 121300 lb |
| Noise level, measured (2000/14/EC) | 126 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 130 dB(A) | |
The 4,750 kg Rammer 5011E hammer is suitable for carriers between 43 and 80 tons. Designed by using a revolutionary new operating principle which combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 55011E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 4750 kg | 10470 lb |
| Weight | 3900 kg | 8600 lb |
| Working length | 3329 mm | 131.1 in |
| Impact rate, Long stroke | 370 - 530 bpm | |
| Impact rate, Short stroke | 450 - 620 bpm | |
| Operating pressure | 160 - 170 bar | 2320 - 2465 psi |
| Oil flow range | 280 - 380 l/min | 74.0 - 100.4 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 108 kW | 145 hp |
| Tool diameter | 190 mm | 7.48 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/2" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/2" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 45 - 69 t | 99200 - 152100 lb |
| Carrier weight, range *3 | 43 - 80 t | 94800 - 176400 lb |
| Noise level, measured (2000/14/EC) | 122 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 126 dB(A) | |
The 7,400 kg Rammer 9033E is suitable for carriers between 65 and 120 tons. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
Heavy duty housing and in-the-field rotatable and replaceable Lower Tool Bushing allows to minimize operating costs.
The Rammer 9033E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 7400 kg | 16310 lb |
| Weight | 6000 kg | 13230 lb |
| Working length | 3707 mm | 145.94 in |
| Impact rate, Long stroke | 300 - 520 bpm | |
| Impact rate, Short stroke | 355 - 645 bpm | |
| Operating pressure | 170 - 180 bar | 2465 - 2610 psi |
| Oil flow range | 360 - 460 l/min | 95.1 - 121.5 gal/min |
| Pressure relief setting *2 | 230 bar | 3335 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 138 kW | 185 hp |
| Tool diameter | 215 mm | 8.46 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/2" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/2" | |
| Pressure line size, min. inner diameter | 38 mm | 1.50 in |
| Return line size, min. inner diameter | 38 mm | 1.50 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 65 - 120 t | 143300 - 264600 lb |
| Noise level, measured (2000/14/EC) | 127 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 131 dB(A) | |
There is a Rammer® hydraulic hammer for virtually any breaking application. So whether you are working with demolition, recycling, mining, construction or quarrying, we have the hammer to give you the best results.
Rammer® hammers are tough, durable and offer you the most economical owning and operating costs while delivering maximum production.
Stronger than time, the Excellence Line is Rammer flagship line of hydraulic hammers, which has been serving customers around the world for over four decades. The Excellence Line continues Rammer's tradition of delivering innovative hammers designed to improve your profitability, safety and performance.
All Excellence Line hammers include integrated smart RD3 remote monitoring system. With MyFleet portal access to data you are able to follow operating hours, GPS location and service intervals for easier fleet management and more efficient processes.
With Rammer's Medium Range hydraulic hammers no job is too dirty and no conditions are too tough for you.
Slim and lightweight construction allows the hammer to reach narrow spaces and offers the best in market power-weight ratio for higher productivity.
Medium Range hydraulic hammers are your reliable long life solution for any breaking application for carriers between 19,800-264,000.
Features:
The Rammer 1322E has been built to last. The 850 kg hammer is suitable for carriers in the 9 to 15 tonne range. Low-maintenance design ensures lower owning and operating costs.
The 1322E features field replaceable lower tool bushing and sealed membrane-type accumulator to ensure that every blow is as hard as the previous, whilst providing protection against hydraulic spikes.
The Rammer 1322E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 850 kg | 1870 lb |
| Weight | 710 kg | 1570 lb |
| Impact rate (frequency) | 500 - 1000 bpm | |
| Operating pressure | 125 - 160 bar | 1815 - 2320 psi |
| Oil flow range | 60 - 120 l/min | 15.9 - 31.7 gal/min |
| Pressure relief setting *2 | 175 - 210 bar | 2540 - 3045 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Pressure in LP-circuit | 26 - 28 bar | 375 - 405 psi |
| Back pressure max | 20 bar | 290 psi |
| Input power | 32 kW | 43 hp |
| Tool diameter | 95 mm | 3.74 in |
| Pressure line connection (IN) | BSPP-internal 1" | |
| Return line connection (OUT) | BSPP-internal 1" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 1/2" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 9 - 15 t | 19800 - 33100 lb |
| Noise level, measured (2000/14/EC) | 136 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 140 dB(A) | |
The Rammer 1655E hydraulic hammer is suitable for carriers in the 12 to 20 tonne range. The 1,100 kg hammer with an impact rate of 540–920 blows per minute, features Rammer’s Fixed Blow Energy operating principle, which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 1655E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 1100 kg | 2430 lb |
| Weight | 890 kg | 1960 lb |
| Impact rate (frequency) | 540 - 920 bpm | |
| Operating pressure | 135 - 145 bar | 1960 - 2105 psi |
| Oil flow range | 90 - 130 l/min | 23.8 - 34.3 gal/min |
| Pressure relief setting *2 | 190 bar | 2755 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 31 kW | 42 hp |
| Tool diameter | 115 mm | 4.53 in |
| Pressure line connection (IN) | SAE 6000 psi 1" | |
| Return line connection (OUT) | SAE 6000 psi 1" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 12 - 20 t | 26500 - 44100 lb |
| Noise level, measured (2000/14/EC) | 123 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 127 dB(A) | |
The Rammer 2166E hydraulic hammer is suitable for carriers in the 16 to 26 tonne range. The 1,360 kg hammer with an impact rate of 430 - 790 blows per minute features Rammer’s Fixed Blow Energy operating principle, which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 2166E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 1360 kg | 3000 lb |
| Weight | 1130 kg | 2490 lb |
| Impact rate (frequency) | 430 - 790 bpm | |
| Operating pressure | 140 - 160 bar | 2030 - 2320 psi |
| Oil flow range | 120 - 180 l/min | 31.7 - 47.6 gal/min |
| Pressure relief setting *2 | 210 bar | 3045 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 48 kW | 64 hp |
| Tool diameter | 125 mm | 4.92 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 16 - 26 t | 35300 - 57300 lb |
| Noise level, measured (2000/14/EC) | 121 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 125 dB(A) | |
Rammer 2577E hydraulic hammer is suitable for carriers in the 21 to 32 tonne range. The 1,670 kg hammer with an impact rate of 450 to 750 blows per minute features Rammer’s Fixed Blow Energy operating principle which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 2577E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 1670 kg | 3680 lb |
| Weight | 1410 kg | 3110 lb |
| Working length | 2299 mm | 90.5 in |
| Impact rate (frequency) | 450 - 750 bpm | |
| Operating pressure | 135 - 145 bar | 1960 - 2105 psi |
| Oil flow range | 140 - 200 l/min | 37.0 - 52.8 gal/min |
| Pressure relief setting *2 | 190 bar | 2755 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 48 kW | 64 hp |
| Tool diameter | 135 mm | 5.31 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 23 - 30 t | 50700 - 66100 lb |
| Carrier weight, range *3 | 21 - 32 t | 46300 - 70500 lb |
| Noise level, measured (2000/14/EC) | 120 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 124 dB(A) | |
The 2,350 kg Rammer 3288E hydraulic hammer is suitable for carriers in the 26 to 42 tonne range. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 3288E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 2350 kg | 5181 lb |
| Weight | 2040 kg | 4500 lb |
| Working length | 2581 mm | 101.6 in |
| Impact rate, Long stroke | 370 - 630 bpm | |
| Impact rate, Short stroke | 460 - 740 bpm | |
| Operating pressure | 150 - 160 bar | 2175 - 2320 psi |
| Oil flow range | 160 - 250 l/min | 42.3 - 66.0 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 67 kW | 90 hp |
| Tool diameter | 142 mm | 5.59 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 28 - 38 t | 61700 - 83800 lb |
| Carrier weight, range *3 | 26 - 42 t | 57300 - 92600 lb |
| Noise level, measured (2000/14/EC) | 124 dB(A) | |
| Noise level, guaranteed (2000/14/EC) |
128 dB(A) |
|
The 3,380 kg Rammer 4099E is suitable for carriers in the 36 to 55 tonne range. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 4099E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 3380 kg | 7450 lb |
| Weight | 2800 kg | 6170 lb |
| Working length | 2962 mm | 116.6 in |
| Impact rate, Long stroke | 400 - 560 bpm | |
| Impact rate, Short stroke | 520 - 700 bpm | |
| Operating pressure | 150 - 160 bar | 2175 - 2320 psi |
| Oil flow range | 250 - 350 l/min | 66.0 - 92.5 gal/min |
| Pressure relief setting *2 | 210 bar | 3045 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 12 bar | 175 psi |
| Input power | 93 kW | 125 hp |
| Tool diameter | 166 mm | 6.54 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 37 - 50 t | 81600 - 110200 lb |
| Carrier weight, range *3 | 36 - 55 t | 79400 - 121300 lb |
| Noise level, measured (2000/14/EC) | 126 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 130 dB(A) | |
The 4,750 kg Rammer 5011E hammer is suitable for carriers between 43 and 80 tons. Designed by using a revolutionary new operating principle which combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 55011E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 4750 kg | 10470 lb |
| Weight | 3900 kg | 8600 lb |
| Working length | 3329 mm | 131.1 in |
| Impact rate, Long stroke | 370 - 530 bpm | |
| Impact rate, Short stroke | 450 - 620 bpm | |
| Operating pressure | 160 - 170 bar | 2320 - 2465 psi |
| Oil flow range | 280 - 380 l/min | 74.0 - 100.4 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 108 kW | 145 hp |
| Tool diameter | 190 mm | 7.48 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/2" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/2" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 45 - 69 t | 99200 - 152100 lb |
| Carrier weight, range *3 | 43 - 80 t | 94800 - 176400 lb |
| Noise level, measured (2000/14/EC) | 122 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 126 dB(A) | |
The 7,400 kg Rammer 9033E is suitable for carriers between 65 and 120 tons. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
Heavy duty housing and in-the-field rotatable and replaceable Lower Tool Bushing allows to minimize operating costs.
The Rammer 9033E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 7400 kg | 16310 lb |
| Weight | 6000 kg | 13230 lb |
| Working length | 3707 mm | 145.94 in |
| Impact rate, Long stroke | 300 - 520 bpm | |
| Impact rate, Short stroke | 355 - 645 bpm | |
| Operating pressure | 170 - 180 bar | 2465 - 2610 psi |
| Oil flow range | 360 - 460 l/min | 95.1 - 121.5 gal/min |
| Pressure relief setting *2 | 230 bar | 3335 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 138 kW | 185 hp |
| Tool diameter | 215 mm | 8.46 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/2" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/2" | |
| Pressure line size, min. inner diameter | 38 mm | 1.50 in |
| Return line size, min. inner diameter | 38 mm | 1.50 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 65 - 120 t | 143300 - 264600 lb |
| Noise level, measured (2000/14/EC) | 127 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 131 dB(A) | |
Vendor: My Store
PERFORMANCE SERIES HYDRAULIC HAMMERS FOR MINI EXCAVATORS 1800-26500 LBS.
Vendor: SoCal Attachments
Rammer® RPV Static Pulverizer
Vendor: SoCal Attachments
Rammer® RPV Rotating Pulverizer
Vendor: SoCal Attachments
RAMMER HO-PAC 1000CS Skid Steer Plate Compactor
There is a Rammer® hydraulic hammer for virtually any breaking application. So whether you are working with demolition, recycling, mining, construction or quarrying, we have the hammer to give you the best results.
Rammer® hammers are tough, durable and offer you the most economical owning and operating costs while delivering maximum production.
Stronger than time, the Excellence Line is Rammer flagship line of hydraulic hammers, which has been serving customers around the world for over four decades. The Excellence Line continues Rammer's tradition of delivering innovative hammers designed to improve your profitability, safety and performance.
All Excellence Line hammers include integrated smart RD3 remote monitoring system. With MyFleet portal access to data you are able to follow operating hours, GPS location and service intervals for easier fleet management and more efficient processes.
With Rammer's Medium Range hydraulic hammers no job is too dirty and no conditions are too tough for you.
Slim and lightweight construction allows the hammer to reach narrow spaces and offers the best in market power-weight ratio for higher productivity.
Medium Range hydraulic hammers are your reliable long life solution for any breaking application for carriers between 19,800-264,000.
Features:
The Rammer 1322E has been built to last. The 850 kg hammer is suitable for carriers in the 9 to 15 tonne range. Low-maintenance design ensures lower owning and operating costs.
The 1322E features field replaceable lower tool bushing and sealed membrane-type accumulator to ensure that every blow is as hard as the previous, whilst providing protection against hydraulic spikes.
The Rammer 1322E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 850 kg | 1870 lb |
| Weight | 710 kg | 1570 lb |
| Impact rate (frequency) | 500 - 1000 bpm | |
| Operating pressure | 125 - 160 bar | 1815 - 2320 psi |
| Oil flow range | 60 - 120 l/min | 15.9 - 31.7 gal/min |
| Pressure relief setting *2 | 175 - 210 bar | 2540 - 3045 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Pressure in LP-circuit | 26 - 28 bar | 375 - 405 psi |
| Back pressure max | 20 bar | 290 psi |
| Input power | 32 kW | 43 hp |
| Tool diameter | 95 mm | 3.74 in |
| Pressure line connection (IN) | BSPP-internal 1" | |
| Return line connection (OUT) | BSPP-internal 1" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 1/2" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 9 - 15 t | 19800 - 33100 lb |
| Noise level, measured (2000/14/EC) | 136 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 140 dB(A) | |
The Rammer 1655E hydraulic hammer is suitable for carriers in the 12 to 20 tonne range. The 1,100 kg hammer with an impact rate of 540–920 blows per minute, features Rammer’s Fixed Blow Energy operating principle, which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 1655E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 1100 kg | 2430 lb |
| Weight | 890 kg | 1960 lb |
| Impact rate (frequency) | 540 - 920 bpm | |
| Operating pressure | 135 - 145 bar | 1960 - 2105 psi |
| Oil flow range | 90 - 130 l/min | 23.8 - 34.3 gal/min |
| Pressure relief setting *2 | 190 bar | 2755 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 31 kW | 42 hp |
| Tool diameter | 115 mm | 4.53 in |
| Pressure line connection (IN) | SAE 6000 psi 1" | |
| Return line connection (OUT) | SAE 6000 psi 1" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 12 - 20 t | 26500 - 44100 lb |
| Noise level, measured (2000/14/EC) | 123 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 127 dB(A) | |
The Rammer 2166E hydraulic hammer is suitable for carriers in the 16 to 26 tonne range. The 1,360 kg hammer with an impact rate of 430 - 790 blows per minute features Rammer’s Fixed Blow Energy operating principle, which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 2166E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 1360 kg | 3000 lb |
| Weight | 1130 kg | 2490 lb |
| Impact rate (frequency) | 430 - 790 bpm | |
| Operating pressure | 140 - 160 bar | 2030 - 2320 psi |
| Oil flow range | 120 - 180 l/min | 31.7 - 47.6 gal/min |
| Pressure relief setting *2 | 210 bar | 3045 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 48 kW | 64 hp |
| Tool diameter | 125 mm | 4.92 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 26 mm | 1.02 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 16 - 26 t | 35300 - 57300 lb |
| Noise level, measured (2000/14/EC) | 121 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 125 dB(A) | |
Rammer 2577E hydraulic hammer is suitable for carriers in the 21 to 32 tonne range. The 1,670 kg hammer with an impact rate of 450 to 750 blows per minute features Rammer’s Fixed Blow Energy operating principle which ensures optimum impact energy with every blow, regardless of hydraulic flow fluctuations.
The Rammer 2577E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 1670 kg | 3680 lb |
| Weight | 1410 kg | 3110 lb |
| Working length | 2299 mm | 90.5 in |
| Impact rate (frequency) | 450 - 750 bpm | |
| Operating pressure | 135 - 145 bar | 1960 - 2105 psi |
| Oil flow range | 140 - 200 l/min | 37.0 - 52.8 gal/min |
| Pressure relief setting *2 | 190 bar | 2755 psi |
| Pressure relief max | 220 bar | 3190 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 48 kW | 64 hp |
| Tool diameter | 135 mm | 5.31 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 26 mm | 1.02 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 23 - 30 t | 50700 - 66100 lb |
| Carrier weight, range *3 | 21 - 32 t | 46300 - 70500 lb |
| Noise level, measured (2000/14/EC) | 120 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 124 dB(A) | |
The 2,350 kg Rammer 3288E hydraulic hammer is suitable for carriers in the 26 to 42 tonne range. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 3288E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 2350 kg | 5181 lb |
| Weight | 2040 kg | 4500 lb |
| Working length | 2581 mm | 101.6 in |
| Impact rate, Long stroke | 370 - 630 bpm | |
| Impact rate, Short stroke | 460 - 740 bpm | |
| Operating pressure | 150 - 160 bar | 2175 - 2320 psi |
| Oil flow range | 160 - 250 l/min | 42.3 - 66.0 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 67 kW | 90 hp |
| Tool diameter | 142 mm | 5.59 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 28 - 38 t | 61700 - 83800 lb |
| Carrier weight, range *3 | 26 - 42 t | 57300 - 92600 lb |
| Noise level, measured (2000/14/EC) | 124 dB(A) | |
| Noise level, guaranteed (2000/14/EC) |
128 dB(A) |
|
The 3,380 kg Rammer 4099E is suitable for carriers in the 36 to 55 tonne range. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 4099E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 3380 kg | 7450 lb |
| Weight | 2800 kg | 6170 lb |
| Working length | 2962 mm | 116.6 in |
| Impact rate, Long stroke | 400 - 560 bpm | |
| Impact rate, Short stroke | 520 - 700 bpm | |
| Operating pressure | 150 - 160 bar | 2175 - 2320 psi |
| Oil flow range | 250 - 350 l/min | 66.0 - 92.5 gal/min |
| Pressure relief setting *2 | 210 bar | 3045 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 12 bar | 175 psi |
| Input power | 93 kW | 125 hp |
| Tool diameter | 166 mm | 6.54 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/4" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/4" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 37 - 50 t | 81600 - 110200 lb |
| Carrier weight, range *3 | 36 - 55 t | 79400 - 121300 lb |
| Noise level, measured (2000/14/EC) | 126 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 130 dB(A) | |
The 4,750 kg Rammer 5011E hammer is suitable for carriers between 43 and 80 tons. Designed by using a revolutionary new operating principle which combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
The Rammer 55011E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 4750 kg | 10470 lb |
| Weight | 3900 kg | 8600 lb |
| Working length | 3329 mm | 131.1 in |
| Impact rate, Long stroke | 370 - 530 bpm | |
| Impact rate, Short stroke | 450 - 620 bpm | |
| Operating pressure | 160 - 170 bar | 2320 - 2465 psi |
| Oil flow range | 280 - 380 l/min | 74.0 - 100.4 gal/min |
| Pressure relief setting *2 | 220 bar | 3190 psi |
| Pressure relief max | 230 bar | 3335 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 108 kW | 145 hp |
| Tool diameter | 190 mm | 7.48 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/2" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/2" | |
| Pressure line size, min. inner diameter | 32 mm | 1.26 in |
| Return line size, min. inner diameter | 32 mm | 1.26 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, optimum | 45 - 69 t | 99200 - 152100 lb |
| Carrier weight, range *3 | 43 - 80 t | 94800 - 176400 lb |
| Noise level, measured (2000/14/EC) | 122 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 126 dB(A) | |
The 7,400 kg Rammer 9033E is suitable for carriers between 65 and 120 tons. Designed by using a revolutionary new operating principle that combines stroke length, blow energy and Rammer’s idle blow protector, allowing the hammer to be adjusted to match individual carriers and applications, improving hydraulic efficiency and safety.
Heavy duty housing and in-the-field rotatable and replaceable Lower Tool Bushing allows to minimize operating costs.
The Rammer 9033E comes with the remote monitoring hardware RD3 installed.
| Minimum working weight, flange mounted *1 | 7400 kg | 16310 lb |
| Weight | 6000 kg | 13230 lb |
| Working length | 3707 mm | 145.94 in |
| Impact rate, Long stroke | 300 - 520 bpm | |
| Impact rate, Short stroke | 355 - 645 bpm | |
| Operating pressure | 170 - 180 bar | 2465 - 2610 psi |
| Oil flow range | 360 - 460 l/min | 95.1 - 121.5 gal/min |
| Pressure relief setting *2 | 230 bar | 3335 psi |
| Pressure relief max | 240 bar | 3480 psi |
| Back pressure max | 10 bar | 145 psi |
| Input power | 138 kW | 185 hp |
| Tool diameter | 215 mm | 8.46 in |
| Pressure line connection (IN) | SAE 6000 psi 1 1/2" | |
| Return line connection (OUT) | SAE 6000 psi 1 1/2" | |
| Pressure line size, min. inner diameter | 38 mm | 1.50 in |
| Return line size, min. inner diameter | 38 mm | 1.50 in |
| Grease connection | BSPP-internal 3/8" | |
| Air connection (A) | BSPP-internal 3/8" | |
| Optimum oil temperature | 40 - 60 °C | 104 - 140 °F |
| Allowed oil temperature range | -20 - 80 °C | -4 - 176 °F |
| Optimum oil viscosity at operating temperature | 30 - 60 cSt | |
| Allowed viscosity range | 20 - 1000 cSt | |
| Carrier weight, range *3 | 65 - 120 t | 143300 - 264600 lb |
| Noise level, measured (2000/14/EC) | 127 dB(A) | |
| Noise level, guaranteed (2000/14/EC) | 131 dB(A) | |
Vendor: My Store
PERFORMANCE SERIES HYDRAULIC HAMMERS FOR MINI EXCAVATORS 1800-26500 LBS.
Vendor: SoCal Attachments
Rammer® RPV Static Pulverizer
Vendor: SoCal Attachments
Rammer® RPV Rotating Pulverizer
Vendor: SoCal Attachments
RAMMER HO-PAC 1000CS Skid Steer Plate Compactor